Although it includes pages of options, each setting is explained in sufficient detail for the neophyte to understand what it does and why it’s important. Of the configurable components in TBS’ Long Range kit, the Naza-M V2 is easiest to set up. Twenty meters isn’t very high, and your quadcopter will plow into any tree, building or pole in its way if you aren’t clear of obstacles. Sound like useful functionality to have on a $3000+ aircraft? It is. A quad above 20m maintains its altitude and flies straight back before hovering for 15 seconds and then landing itself. A multi-rotor flying under 20m ascends before making the journey automatically. Should the radio lose contact (or you simply get into trouble and manually trigger it), a failsafe mode engages-the quad hovers for three seconds, and if you haven’t regained control, returns to the spot where you established satellite lock and started the motors. Naturally, the GPS fixes on satellites to triangulate your position. The LED conveys system status through a series of red, yellow and green blink codes, additionally hosting the microUSB interface used to attach your PC. But in brief, the PMU takes a 7-25V input and outputs 5V at up to 3A. DJI spells out the purpose of each component in its documentation. It seems that the remote controller needs to be repaired.The box includes a main controller, a power management unit, an LED block with USB connectivity and a GPS. I also asked the same question to DJI Support who sent me the same answer. They told me that they can't do anything if they don't have the remote control and the drone. I contacted the support of Studio Sport, the website where I bought the Phantom. I had a quick flight to take a picture of the beach, and stoped everything.ġ5 minutes after, I wanted to download the pictures, and was not able to turn it on. I plugged it to AC, turned it on, unplugged it, and the leds displayed 4 white leds (full battery). It was the day before my flight to French Polynesia, so I decided to take the drone with me to take great videos of my honeymoon.ģ days after, I arrived in Moorea and retried to start the controller. ![]() When I arrived at home the day after, I was able to start the controller. I was not able to use the phantom for my wedding and stored it in its backback. When you look at these symptoms, you should think that the battery is gone. * Able to start remote controller on AC but stops when unplugging it from sector (even after a night of charge) * Probably not a charger issue because the phantom smart batteries charge as expected ![]() I suppose it should stop when battery is full but it doesn't even after 12 hours. * When plugged to AC power adapter, the loading white leds blink from 1st to 4th but never stop. * Can't power on the controller using the sequence (short press followed by a long press). * Can't see battery level when I press the power button. I was not able to turn on the phantom 4 remote controller I charged the controller and the battery, had a first flight with it.īut 5 days ago, I wanted to have a last check on my setup before my wedding. I recently bought a DJI Phantom 4 to replace my TBS Discovery and a custom-carbon-foldable-tbs-discovery-like quadcopter (currently for sale).
0 Comments
Leave a Reply. |